RX350 Oil Change

Written By: DriveDIY
  • Comments: 6
  • Favorites: 0
  • Completions: 1

Difficulty

Easy

Steps

8

Time Required

00:20:00

Sections

1

Flags

0

  1. Edit

    Open the cap and pull up the dip stick to allow air in so oil will drain

    CyclopDad - Reply

  2. Using vehicle ramps, drive up to gain clearance.

    • Using vehicle ramps, drive up to gain clearance.

    • Oil Drain

    • Using a 17mm Wrench , open the drain valve.

    • Oil may be HOT!

    Edit

    15 mm bolt for me

    CyclopDad - Reply

  3. Using a 3/8" square socket adapter , remove drain cap The replacement oil filter will include a plastic drain nipple that can be screwed into this to facilitate draining the excess oil inside the oil filter housing

    • Using a 3/8" square socket adapter , remove drain cap

    • The replacement oil filter will include a plastic drain nipple that can be screwed into this to facilitate draining the excess oil inside the oil filter housing

    Edit

    The plastic drain is not screwed in, but pushed in.

    CyclopDad - Reply

  4. Using a Lexus/Toyota adapter , remove the oil filter housing cap Using a Lexus/Toyota adapter , remove the oil filter housing cap

    • Using a Lexus/Toyota adapter , remove the oil filter housing cap

    Edit

  5. New O Rings are included in the new filter kit. New O Rings are included in the new filter kit. New O Rings are included in the new filter kit.

    • New O Rings are included in the new filter kit.

    Edit

    Grease both o-rings slightly with new motor oil

    CyclopDad - Reply

  6. Always replace this gasket when doing an oil change.

    • Always replace this gasket when doing an oil change.

    Edit

    Mine was stuck to the oil pan. Should be ok until the next oil change. Will try to knock it off with a flathead screw driver and a hammer

    CyclopDad - Reply

  7. Replace Filter and Drain Plug once all oil has been drained. Replace Filter and Drain Plug once all oil has been drained.

    • Replace Filter and Drain Plug once all oil has been drained.

    Edit

  8. Add 6 Qts of Lexus Approved 0w-20 Oil

    • Add 6 Qts of Lexus Approved 0w-20 Oil

    • Check dip stick and top off accordingly

    • Lexus States that complete oil change and filter will use 6.4 qt

    Edit
Finish Line

One other person completed this guide.

Author

DriveDIY

Member since: 12/12/2015

1,752 Reputation

25 Guides authored

One Comment

Well written and thank you for the tutorial

CyclopDad - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 54

Past 30 Days: 213

All Time: 17,616