Introduction
This guide will show you how to restore headlights that are turning yellow and faded.
Parts
No parts specified.
-
-
Using the supplied 500 grit sandpaper and drill adapter , evenly sand the entire headlight.
-
Do not apply too much pressure and maintain a relatively moderate drill speed (1200-1600 RPM)
-
I removed the sand paper and finished it by hand to reach any areas near the edges.
-
-
-
Using the supplied 800 grit sandpaper and drill adapter , evenly sand the entire headlight.
-
Do not apply too much pressure and maintain a relatively moderate drill speed (1200-1600 RPM)
-
I removed the sanding paper and finished it by hand to reach any areas near the edges.
-
-
-
Apply some water to the sanding pad and evenly polish the headlight.
-
-
-
Using the soft pad and rubbing compound ,polish entire headlight.
-
Apply a dime sized amount of compound on pad and spread around headlight to prevent splashing of the compound.
-