Skip to main content
  1. Open Trunk
    • Open Trunk

    • Loosen Torx Screws

  2. Remove Tail Light and disconnect electrical connections
    • Remove Tail Light and disconnect electrical connections

  3. In the far corner is a small fastener securing a tab on the bumper to the quarter panel, remove.
    • In the far corner is a small fastener securing a tab on the bumper to the quarter panel, remove.

  4. From underneath remove the screw that secures the tip of the bumper to the quarter panel.
    • From underneath remove the screw that secures the tip of the bumper to the quarter panel.

  5. You can now pull the sides of the bumper away from the quarter panel.
    • You can now pull the sides of the bumper away from the quarter panel.

  6. From underneath remove the 2 screws holding the very bottom edge of the bumper.
    • From underneath remove the 2 screws holding the very bottom edge of the bumper.

  7. From underneath, by the muffler, remove the 2 bolts holding the bottom center in place.
    • From underneath, by the muffler, remove the 2 bolts holding the bottom center in place.

  8. Carefully slide the rear bumper cover off of the car.
    • Carefully slide the rear bumper cover off of the car.

Finish Line

DriveDIY

Member since: 12/12/2015

1,722 Reputation

25 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 24

All Time: 2,962